Online UPS

Detailed Product Description
True online double conversion technologyWide input voltage rangeZero transfer timeProtection against all types of power problemsNo add-on CNTL unit required for parallel connectionLow initial investment and flexible for future expansionHighest reliability and maximum performance for power sharing and redundancyEquipped with Maintenance Bypass SwitchSmart RS232 and Intelligent slot interfaceSealed lead-acid, maintenance free batteryThe best charger design to recharge low battery as quickly as possible with out damaging
batteries in 2 amp up to 8 amp and 240 VDC. Allowing 90% recharge in as
little as 10 Hours after a total drain.
Audible and Visual Over-load indicators:The incorporated LED over load indicator prevents ups overloads and premature failure
of the UPS.
N+1 Parallel Redundancy:Allows a 6 kva to grow upto 18kva or 12kva with 6 kva redundancy and a 20 kva to
60 kva or 40 kva with 20 Kva redundancy allowing user to add capacity as needed
and lower investment.
Simplified board separation:Dependent on the Units all operation are separated into 5 pcb boards allowing quick
respond to damages and provides our valued dealers with simplified inventory
and faster service to the end users.
Dynamic Bypass:Automatic dynamic Bypass and manual Bypass provide a loop to repair UPS with out
having to disconnect loads ideal for non stop computing for critical applications.
SNMP Slot:Provides remote monitoring and control of UPS where a PC is not present or where
this function is needed to be separated.
IBM AS 400 Dry Contact card:Optional card to communicate in IBM AS 400 ProtolsSine-wave output:True sine-wave output with a 3% THD on batteries. This feature provides dependable
and compatible power for your most critical applications.
True double conversion technology with zero Transfer Time:This advance design provides the closest you can get to Pure constant power in the
industry
TECHNICAL SPECIFICATIONS:Model C6K C10K Rated Power VA/W 6kVA/4.2kW 10kVA/7kW Input Nominal Voltage 220VAC Voltage Range 176 ~ 276VAC Frequency Range 46 ~ 54Hz Power Factor 0.98 Connection Hardwired Output Voltage 220VAC +/-1% Frequency 50Hz +/-0.1% ( Battery mode) Waveform Sine Wave Power factor 0.7 Voltage Distortion 2% under linear load Overload Capability 105% ~ 130% for 10 min., 130% for 1 min. Current Crest Ratio 3:1 max. Connection Hardwired Battery Type Sealed, Maintenance free, Lead-Acid Quantity 20 pieces Back-up time (full load) 7 min 5 min Recharge time 8 hrs to 90% of capacity after full load discharge Transfer time 0 ms Maintenance Bypass Switch Yes LED indicators Status Load level/Battery level, Battery , Utility power, Inverter, Bypass, Overload, Fault
Audible alarm Bypass Alarm beeps every two minutes Battery discharge Alarm beeps every four seconds, every second if battery low Overload Alarm beeps two for every second Fault Alarm beeps continuously Acoustic noise At 1 meter distance 55 dBA Communications DB-9 Port RS232 serial interface Intelligent Slot Options: WebPower, AS400 or WinPower CMC Parallel Port up to three units in parallel for power redundancy and load sharing Environmental Operating temperature 0 ~ 40'C Operating humidity 20% ~ 90% non-condensing Weight Net (kg) 84 93 Dimensions W x D x H (mm) 260 x 570 x 717